En
aversagro@gmail.com

Inter row cultivator Green Razor 4.2 m

In stock
Article: 10510

Inter row cultivator Green Razor 4.2 m

In stock
Article: 10510
Inter row cultivator Green Razor hinged with a width of 4.2 m handles 6-row crops row crops with low and high stem to 90 cm inter-row spacing can be adjusted for 45 - 70 cm
The type of aggregation
Mounted
Power tractor
not less than 60 hp
236 200 грн
214 800 грн
For more information
contact us by phone:

Inter row cultivator Green Razor universal mounted with a working width of 4.2 m:

  • designed for inter-row processing of any crops: cereals, row crops, vegetables, etc .;
  • struggles with one and perennial weeds resistant to soil herbicides;
  • destroys the soil crust, loosens the surface of the field, creates a mulching layer on the soil surface to preserve moisture;
  • improves water permeability and air quality of the soil;
  • activates microbiological processes in the soil;
  • fertilizes the soil;
  • zone robots light, medium, heavy soils;
  • it is most effective to use a cultivator cultivating immediately after rain;
  • the depth of processing depends on the timing, phase of crop development and soil moisture.

Advantages and design features of the inter row cultivator Green Razor 4.2 m:

  • has a high frame, which allows for inter-row processing at a later date of vegetation;
  • processes crops of row crops with low and high stems up to 90 cm;
  • the method of fastening sections with working bodies makes it easy to adapt to different row spacing, row spacing can be adjusted from 45 to 70 cm;
  • sections with working bodies of the cultivator are equipped with universal lancet paws mounted on a spring vibration stand;
  • legs and racks are made of steel of high wear resistance, leg width 150 mm;
  • five working bodies are fixed on one section when adjusting for a row spacing of 600-700 mm or three working bodies when processing a row spacing of 450-500 mm;
  • each section with working bodies has a support wheel, which makes it possible to copy the surface of the field along the entire width of the processing unit;
  • a safety spring is installed on each section with working bodies, which ensures the correct clamping force and accurate retention of the depth of tillage;
  • in the design of sections with working bodies, plain bearings are used that do not require maintenance;
  • rolling bearings of the support wheels are protected by anthers, which allows to extend their service life;
  • it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35kg / cm²);
  • the cultivator is transferred from the working position to the transport one and vice versa by lowering the tractor hitch, in the parking position the cultivator is on supports;
  • on the design and method of aggregation mounted cultivator;
  • aggregation with wheeled and tracked tractors from 60 hp;
  • attendants - 1 person (tractor driver).

Additional equipment:

  • liquid and dry fertilizer application system;
  • auxiliary guards protecting plant leaves from damage or falling asleep with soil;
  • finger polyurethane wheels;
  • skrebniki;
  • various combinations of paws.

       Specifications:

Working speed, km / h ... 3-10
Working width, m ... 4.2
Productivity, ha / h ... 1.3-4.2
Max. processing depth, mm ... 120
Working bodies (for row spacing 700 mm), pcs ... 7
Minimum row spacing, mm ... 450
Maximum row spacing, mm ... 700
The paw is wide, mm ... 150
Transport speed, km / h ... 20
Unit weight, kg ... 1350
Tractor power, not less than hp ... 60
Type ... mounted
Attendants, people ... 1 (tractor operator)
Reviews
Product reviews yet. You can leave your filling out the form.
Read all Collapse