Seeder pneumatic single-row monodisc Multisem 6.3
Seeder pneumatic single-row monodisc Multisem 6.3
contact us by phone:
PNEUMATIC MONODISC SEEDER MULTISEM 6.3 (single-row)
The single-row MULTISEM 6.3 is designed for direct sowing of grain, industrial and oilseed crops using Roots-Till, No-Till and Mini-Till technology. It is equipped with a parallelogram coulter sowing system, which allows for each sowing section to follow individually the soil topography.
THE ADVANTAGES OF THE MULTISEM 6.3 MONODISC PNEUMATIC SEED DRILL single-row:
- Comfortable and easy to operate.
- Increased reliability and wear resistance of components and the machine as a whole.
- Minimal damage to the surface soil layer.
- Minimal penetration of stubble into the seed hole.
- Precise and uniform sowing at the desired depth, even in the presence of large amounts of crop residues.
- Cutting disk with flange that easily cuts through crop residues.
- Narrow anchor coulter with seed depth adjustment mechanism.
- Seed packer located behind the coulter ensures firm seed-to-soil contact.
Options
row cleaners
loading auger
double wheels
electric seeding system
pneumatic brake system
seed harrow
monocyclonic air cleaner
hydraulic turbine drive
Technical characteristics
|
Indicator |
Value |
|
6.25 |
|
|
Working width, m: |
6 |
|
Working length, m: |
8,6 |
|
Transportation length, m: |
8,5 |
|
Transportation height, m: |
3,9 |
|
Transportation width, m: |
3 |
|
Total weight, t: |
8,4 |
|
Number of coulters: |
24 |
|
Coulter spacing, cm: |
25 |
|
Number of coulter rows: |
1 |
|
Seed/fertilizer placement depth, mm: |
20-85 |
|
Depth adjustment |
Set of clips 50/30/19/10/7 mm |
|
|
on hydraulic cylinder rods |
|
Hopper capacity 55/45, l: |
4000 |
|
Seed, l: |
2200 |
|
Fertilizer, l: |
1800 |
|
Application rate min/max |
|
|
seeds, kg/ha: |
1/300 |
|
fertilizer, kg/ha: |
3/300 |
|
Seed/fertilizer rate adjustment: |
Variator |
|
Tire sizes |
|
|
support wheels: |
700/050-22,5 16PR FLOTATION 648 |
|
support wheels, optional: |
750/45 R 22.5 FL-630 |
|
Tire pressure, bar: |
3,3 – 3,6 |
|
Tractor hitch: |
Two-point hitch KAT2/KAT3 |
|
Hydraulic requirement |
|
|
lifting/lowering: |
1 double-acting spool valve |
|
Folding/unfolding: |
1 double-acting spool valve |
|
Fan drive: |
Tractor PTO |
|
Hydraulic pressure, bar: |
180 |
|
Brake system (optional): |
Pneumatic |
|
Number of tines of the spring harrow - scraper, pcs (optional): |
42 |
|
Tine diameter of the spring harrow - scraper, mm (optional): |
12 |
|
Minimum tractor pulling power, hp: |
140 |
|
For deep tillage it is recommended, hp: |
160 |
|
Number of operating personnel, persons: |
1 |