In the presence of units with different working widths: 2.6 m, 3.9 m, 5.2 m, 6.5 m, 7.8 m, 9.1 m, 10.4 m, 11.7 m, 18.2 m.
Designed for various types of autumn-spring field work:
- field work with a lot of crop residues;
- crushing of a solid surface soil layer;
- application and mixing of herbicides, compost and fertilizers;
- preparation of the field, seed bed with traditional, preserving and zero technologies.
Advantages and design features of the Green Wave vertical tillage turbo cultivator with a working width of 11.7 m:
- it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
- it is aggregated with wheel and caterpillar tractors with engine power corresponding to the width of a particular model;
- It is a trailed machine, it is controlled and serviced by one person (tractor driver);
- the working bodies of the turbo cultivator are 13-wave turbo discs mounted on spring blocks;
- vertical vibration of turbo discs affects the earth like a jackhammer, crushing the soil below the working depth level, breaking soil compaction and creating conditions for the accumulation and preservation of soil moisture;
- when working on very heavy soils, it is possible to install discs at an angle in the range from 0 ° to 6 °. This makes it possible to better loosen and level the soil in difficult conditions;
- spring blocks mounted on the frame in a checkerboard pattern, for better passage of crop residues;
- equipped with a 3-row flex harrow and a spiral-shaped ribbed roller for even distribution of crop residues and crumbling of soil lumps;
- the transfer of the turbo cultivator from the working position to the transport one, and vice versa, is carried out using hydraulic drives. In the parking position, the turbo cultivator is installed on the parking jack;
- to adjust the degree of impact of the train harrow on the soil and plant debris, it is possible to set two tooth positions - 50 ° and 38 °, this is achieved by reversing the sections of the train;
- range of working depth 0-18 cm;
- the distance between the turbo discs is 16 cm;
- 5 bolt reinforced hub with two sealed SKF bearings;
- the force of the springs at which the operation of the safety mechanism of the safety unit begins is 500 kg
- the vertical stroke of the spring unit with turbo discs for circumventing obstacles is up to 250 mm.
Basic equipment:
- turbo cultivator;
- wavy turbo discs 570 mm x 5 mm 13 waves (32 mm wave depth);
- three-row flex harrow;
- spiral-shaped ribbed roller.
Additional equipment:
- tubular roller with a flex harrow;
- special loaders of the unit frame, for using a turbo cultivator on heavy soils, for better penetration of discs into the soil;
- wavy turbo discs 550 mm x 5 mm 8 waves (65 mm wave depth);
- mechanical granular fertilizer application system (for models with a working width of 2.6 m, 3.9 m, 5.2 m).
Specifications:
Type ... trailed
Tractor hitch ... pendulum
Average speed, km / h ... 15
Working width, m ... 11.7
Working length, m ... 8.9
Length during transportation, m ... 8.9
Height during transportation, m ... 5
Width during transportation, m ... 5.5
Total weight, t ... 12.4
Number of spring blocks, pcs … 36
Number of turbo disks, pcs ... 72
The distance between the turbo disks, m ... 0.162
Depth of processing, mm ... 0-180
Depth adjustment ... set of clips 50/30/19/10 / 7mm on the rods of hydraulic cylinders
Tire Sizes:
The support wheels of the wing frames ... 10.0 / 75-15.3 (14PR)
The support wheels of the frames of the central frame ... 19.0 / 45-17 (18PR)
Tire pressure, bar ... 4-5
Hydraulic system pressure, bar ... 180
Minimum tractor power, hp ... 500
When deep processing is recommended, hp ... 550
The number of staff, people ... 1
Product reviews yet. You can leave your filling out the form.