Drilling work on the machine vertical-universal drilling single spindle 2N135
In stock
Article: 10204
Drilling work on the machine vertical-universal drilling single spindle 2N135
In stock
Article: 10204
Machine universal vertical drilling 2Н135 with conventional drilling diameter 35 mm, is designed to perform operations of drilling, reaming, counter boring, countersinking, deployment, and cutting ends of the knives.
1 грн
For more information
contact us by phone:
contact us by phone:
Limits of speed and feed spindle enables processing various kinds of holes on the rational cutting parameters.
Available on the machine mechanical spindle feed, if manual operation cycles.
Capable of processing parts in a wide range of sizes from a variety of materials using the tool of high carbon and high speed steels and hard alloys.
Machines provided with a device reversing the motor of the main motion, which allows them threading machine taps for manual feed of spindle.
Drilling works
| Parameter name | 2Н135 |
|---|---|
| Main specifications | |
| Drilling capacity in steel 45, mm | 35 |
| Smallest and largest distance from spindle nose to table, mm | 30...750 |
| Smallest and largest distance from spindle nose to plate, mm | 700...1120 |
| Distance from vertical spindle axis to the guide strut (radius), mm | 300 |
| Desk | |
| Maximum table load (center), kg | |
| Dimensions of table working surface, mm | 450x500 |
| Number T-slot, Size T-slot | 3 |
| Maximum vertical travel of table (Z axis), mm | 300 |
| Move the table for one turn of the handle, mm | |
| Spindle | |
| Maximal displacement (installation) spindle head, mm | 170 |
| Maximal displacement (stroke) spindle, mm | 250 |
| Spindle movement on one division of the limb, mm | 1,0 |
| Spindle movement per revolution of handwheel-arm, mm | 122,46 |
| Spindle rotation frequency, rev/min | 31,5...1400 |
| Number of spindle speeds | 12 |
| Maximum torque Nm | 400 |
| Taper spindle | Morse 4 |
| Mechanics machine | |
| Number of steps of working feed | 9 |
| Limits the vertical working feed per revolution of spindle, mm | 0,1...1,6 |
| Management cycles | Manual |
| Maximum power flow, kN | 15 |
| Dynamic brake spindle | E |
| Drive | |
| Electric motor of main drive, kW | 4,0 |
| Electric pump coolant Type | X14-22M |
| Machine Size | |
| Machine dimensions, mm | 2535x825x1030 |
| Mass of machine, kg | 1200 |