Turning work on the universal screw-cutting lathe CU-500 (SU-500) service from the company
In stock
Article: 10193
Turning work on the universal screw-cutting lathe CU-500 (SU-500) service from the company
In stock
Article: 10193
Universal screw-cutting lathe CU-500 (SU-500) is designed to handle cylindrical, conical, and complex surfaces - both internal and external, as well as for threading. For the treatment of end surfaces of workpieces used a variety of cutters, reamers, drills, core drills, and taps and dies.
1 грн
For more information
contact us by phone:
contact us by phone:
Main technical specifications screw-cutting lathe CU-500 (SU-500)
- The largest diameter of the workpiece of the Disk type machined above the bed - Ø 500 mm
- The largest diameter of the workpiece of the Shaft type, machined above the slide - Ø 300 mm
- The distance between centers for turning operations - 2000 mm
- The height of centers - 245 mm
- The motor size - 11 kW
- The total weight of the machine - 2,8; 3,0; 3,2; 3,6 t
- The end of spindle - GOST 12593
- The nominal cone diameter D = 106,375 mm, conventional size of spindle's end - 6
- The internal (tooling) spindle taper - 80
- The diameter of through hole in spindle - Ø 62 mm
- The maximum diameter of processed rod - Ø 60 mm
- The numbers limits of direct spindle rotation per minute (21 steps) - 20..100; 80..400; 400..2000 rpm
- The numbers limits of reverse spindle rotation per minute (11 steps) - 20..100; 80..400; 400..2000 rpm
- The standard cartridge diameter - Ø 200, 250 mm
- The longitudinal feed rate limits - 0,04..12 mm/Rev
- The transverse feed rate limits - 0,02..6 mm/Rev
- The steps limit of threads-metric - 0,5..120 mm
- The steps limit of threads-modular - 0,125..30 modules
- The steps limit of threads-inch - 60..1/4 threads per inch
- The steps limit of threads-pitch - 240..1 pitches